Configuration

Settings

Device capture, processing, and behavior controls.

Firmware: 2670
Changes apply immediately after save.
Unsaved Changes

Imaging
Stack Dither Pixels
Dither by (x) pixels. Reset upon Seestar reboot.
Numbers only 10 - 200 pixels)
Stack Dither Interval
Dither every (x) sub frames. Reset upon Seestar reboot.
Numbers Only
Stack Dither
Enable or disable dither. Reset upon Seestar reboot.
Stacking Exposure Length (ms)
Stacking Exposure Length (ms).
Numbers Only (5ms-90000ms)
Continuous Preview Exposure Length (ms)
Continuous Preview Exposure Length (ms), used in the live view.
Numbers Only
Frame Calibration
Frame Calibration
Light Pollution (LP) Filter
Enable or disable light pollution (LP) Filter.
Continuous Capture Mode
Enabling continuous capture mode disables live stacking
4k Live Stack Mode (2x Drizzle)
Enables 2x drizzle on Live Stack for 4k Mode
Save Sub Frames
Save sub frames. (Doesn't include failed.)
Save Failed Sub Frames
Save failed sub frames. (Failed sub frames will have "_failed" added to their filename.)
Light Duration Min
Light Duration Min.
Your firmware may not support stack settings; using the device default (-1).
Numbers Only
Stack Capture Type
Stack capture mode/type.
Stack Capture Count
Number of frames to capture.
Numbers Only
Stack Brightness
Adjust live stack brightness.
Numbers Only
Stack Contrast
Adjust live stack contrast.
Numbers Only
Stack Saturation
Adjust live stack saturation.
Numbers Only
Stack DBE
Enable Dynamic Background Extraction.
Expert Mode
Enable expert mode features.

Environment
Dew Heater
Enable or disable dew heater.

General
Horizontal Calibration
In AltAz mode, enable/disable automatic horizontal calibration at the start of an imaging session
Focal Position - User Defined
Focal Position - User Defined
Numbers Only
Auto Power Off
Enable or disable auto power off
Dark Mode
Enable or disable LEDs while imaging.
Plan Target AF
Auto-focus before planned targets.
Viewplan Go Home
Return home after plan view.
Version: v3.2.1